MAX3509 CATV上行放大器(含应用电路和参数资料)

MAX3509 CATV上行放大器(含应用电路和参数资料)   MAX3509概述 The MAX3509 is a programmable power amplifier for use in CATV upstream applications. The device outputs up to 66dBmV QPSK through a 1:1 transformer. It features variable gain controlled by a 3-wire digital serial bus. Gain control is available in 1dB steps. The device operates over a 5MHz to 65MHz frequency range.

The MAX3509 offers a transmit-disable mode, which places the device in a high-isolation state for use between bursts in TDMA systems. In this mode, all analog functions are shut down, minimizing output noise and power consumption. When entering and leaving transmit-disable mode, transients are kept to 25mV nominal at full gain. In addition, supply current is reduced to 7.8mA.

An additional power-down mode is available. Shutdown mode disables all circuitry and reduces current consumption to less than 1µA.

The MAX3509 is available in a 20-pin TSSOP-EP package for the extended-industrial temperature range(-40°C to +85°C).

MAX3509关键特性

Ultra-Low Power-Up/Down Transients, 25mV (typ) at 66dBmV Output

Single-Supply Operation

Output Level Ranges from <12dBmV to 67dBmV (QPSK)

Gain Programmable in 1dB Steps

Low Transmit Output Noise Floor: -41dBmV (160kHz BW)

Low Transmit-Disable Output Noise: -70dBmV

Shutdown Mode

MAX3509应用/使用

电缆调制解调器
	CATV基础结构
	CATV状态监视
	OPENCATV机顶盒
	线缆电话

MAX3509应用电路
典型工作电路